Home > Full Size Racks/Enclosures > 2-Post Open Frame Server Racks >
1927-3-002-00 : 2-Piece Rack Conversion Kit : Isometric View
Isometric View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Isometric View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Dimetric View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Front View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Left View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Right View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Top View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Back View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Underside View
1927-3-002-00 : 2-Piece Rack Conversion Kit : Packaging View

2-Piece Rack Conversion Kit

Item #: 1927-3-002-00
Availability: Usually Ships Same Day






    The Kendall Howard 2-Piece Conversion Kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. If you have to move or replace the rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 2-Piece Conversion Kit provides a safe and dependable solution.

    • Provides added support to a 2-Post Rack
    • Adjustable from 20" to 35"
    • Mounting hardware not included
    • 19" EIA compliant
    • Made in the USA
    • Limited Lifetime Warranty

    There are no reviews yet.
    Write a review
    Adjustable Depth Each support bracket can adjust from 20" to 35" deep to suit your particular installation requirements.
    Added Support This easy to use bracket system adds strength and stability to any 2-post Telco rack. Whether anchoring two racks together or bracing them to a wall, the Kendall Howard Conversion Kit will provide a safer, more dependable solution.
    Great Cable Lacing Option These horizontal brackets provide a great option for securing heavy and obtrusive trunk cabling up and out of the way.
    Only Uses 2U of Space
    The support braces mount directly on to the vertical rack rails with standard rack hardware. Each brace requires only 2U of rack space leaving you plenty of room for your network, A/V, and other rackmount equipment.
    Part Number 1927-3-002-00
    Width 1"
    Depth Adjustable 20" - 35"
    Height 4"
    Weight 7.00 lbs.
    Shipping Dimensions 18" L x 5" W x 5" H
    Material(s) CRS (Cold Rolled Steel)
    Color/Finish Black Powder Coated Finish
    UPC 879447000405
    Warranty Limited Lifetime Warranty
    Shipping Method FedEx Ground
    • Qty 2 - Conversion Kit Left Arms
    • Qty 2 - Conversion Kit Right Arms
    • Qty 2 - Conversion Kit Center Arms
    • Qty 1 - Assembly Parts Pack
    To add an item to your cart check the item then click the Add To Cart button at the bottom.

    Stay in Touch