Kendall Howard ®
Quick Product Finder
Page:
of 8 < Prev Next >
Products 1-20 of 158
Show

High Speed Fan Assembly Kit

SKU: 1908-4-001-01

1908-4-001-01 : Fan Assembly Kit : Isometric View

The Kendall Howard High Speed Fan Assembly Kit helps to remove ambient heat that rackmount components can emit. Circulating new air into a wall mount cabinet or server enclosure helps to maintain the optimal temperature for devices such as servers, battery backups, and UPS's.

  • Ball bearing design
  • 115V / 115 CFM Fans
  • Impedance protected
  • RoHS compliant
  • Includes power cord, fan guard, and installation hardware
  • 1-Year Limited Warranty

24U 2-Post Relay Rack

SKU: 1911-3-200-24

1911-3-200-24 : 24U 2-Post Relay Rack : Isometric View

Whether working with a wiring closet, telecom room, or data center, the Kendall Howard 2-Post Relay Rack is the ideal racking solution. Its sturdy construction makes a rigid, reliable rack that can hold up to 800 lbs. of equipment, including switches, patch panels, UPS’s, rack shelves, rackmount keyboard trays, and more. The rack features four ¼-20 x 0.5” grounding studs on the inside of the rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. When multiple 2-Post Relay Racks are needed, simply gang them together with the ganging holes on both sides of the frame. You can even gang both the 24U and 45U size racks together because the holes align. Cable pass through slots are also included on the frames to allow cabling to pass through between racks. The completely open top design allows the 2-Post Relay Rack to accept cable bundles. It also makes the rack compatible with most ladder racks and coordinating accessories. When you need a 2-post rack that offers both strength and dependability, there is none other than the 2-Post Relay Rack.

  • 10-32 tapped rails
  • Includes 25 10-32 rack screws
  • Includes four ¼-20 grounding studs
  • Gangable
  • Ships knocked down
  • 800 lb. weight capacity
  • 19” EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

45U 2-Post Relay Rack

SKU: 1911-3-200-45

1911-3-200-45 : 45U 2-Post Relay Rack : Isometric View

Whether working with a wiring closet, telecom room, or data center, the Kendall Howard 2-Post Relay Rack is the ideal racking solution. Its sturdy construction makes a rigid, reliable rack that can hold up to 800 lbs. of equipment, including switches, patch panels, UPS’s, rack shelves, rackmount keyboard trays, and more. The rack features four ¼-20 x 0.5” grounding studs on the inside of the rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. When multiple 2-Post Relay Racks are needed, simply gang them together with the ganging holes on both sides of the frame. You can even gang both the 24U and 45U size racks together because the holes align. Cable pass through slots are also included on the frames to allow cabling to pass through between racks. The completely open top design allows the 2-Post Relay Rack to accept cable bundles. It also makes the rack compatible with most ladder racks and coordinating accessories. When you need a 2-post rack that offers both strength and dependability, there is none other than the 2-Post Relay Rack.

  • 10-32 tapped rails
  • Includes 25 10-32 rack screws
  • Includes four ¼-20 grounding studs
  • Gangable
  • Ships knocked down
  • 800 lb. weight capacity
  • 19” EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

24U 4-Post Adjustable Rack

SKU: 1940-3-100-24

1940-3-100-24 : 24U 4-Post Adjustable Rack : Isometric View

For an adjustable 4-point solution ideal for data centers and wiring closets, go with the 4-Post Adjustable Rack. Its usable depth can adjust from 26” to 38” so you’re not left with a fixed depth. To adjust the depth, simply move each bracket to your desired depth and secure the hardware in place. If you need a larger solution, gang multiple 4-Post Adjustable Racks together by using the ganging holes found on each side. You can even gang both the 24U and 45U size racks together because the holes align. For installations that require connections be made above the rack, such as trunk cabling or ladder racks, simply go through the completely open frame at the top. The 4-Post Adjustable Rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. With its strength, durability, and adjustability the 4-Post Adjustable Rack is a sure fit for your next installation.

  • Adjustable usable depth from 26” to 38”
  • 10-32 tapped rails
  • Includes 50 10-32 rack screws
  • Includes eight 1/4-20 grounding studs
  • Ships knocked down in one box
  • Gangable
  • 1,600 lb. weight capacity
  • 19” EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

45U 4-Post Adjustable Rack

SKU: 1940-3-100-45

1940-3-100-45 : 45U 4-Post Adjustable Rack : Isometric View

For an adjustable 4-point solution ideal for data centers and wiring closets, go with the 4-Post Adjustable Rack. Its usable depth can adjust from 26” to 38” so you’re not left with a fixed depth. To adjust the depth, simply move each bracket to your desired depth and secure the hardware in place. If you need a larger solution, gang multiple 4-Post Adjustable Racks together by using the ganging holes found on each side. You can even gang both the 24U and 45U size racks together because the holes align. For installations that require connections be made above the rack, such as trunk cabling or ladder racks, simply go through the completely open frame at the top. The 4-Post Adjustable Rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. With its strength, durability, and adjustability the 4-Post Adjustable Rack is a sure fit for your next installation.

  • Adjustable usable depth from 26” to 38”
  • 10-32 tapped rails
  • Includes 50 10-32 rack screws
  • Includes eight 1/4-20 grounding studs
  • Ships knocked down in one box
  • Gangable
  • 1,600 lb. weight capacity
  • 19” EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
0300-1-004-00 : Wedge Anchor Kit 3/8 x 3 : Component View

The Kendall Howard Wedge Anchor Kit – 3/8” x 3” works with both wall mount and floor mount products that are being installed into a concrete surface. Four anchors are included with this kit to make mounting products, such as our 2-Post Relay Rack or 4-Post Adjustable Rack to the floor, a breeze. To install, use a 3/8” drill bit to create a hole (at least 1 ½” deep) in a concrete surface. Next, use a hammer to install the wedge anchor; and finally tighten the nut with a wrench. In just a few easy steps, your products will be securely mounted to any concrete surface with the Wedge Anchor Kit.

  • Includes four anchors
  • Suitable for mounting into concrete surfaces
  • Pre-assembled, ready for use
  • Requires a 3/8” drill bit for drilling into the wall or floor

Fan Assembly Kit

SKU: 1908-3-001-01

1908-3-001-01 : Fan Assembly Kit : Isometric View

The Kendall Howard Fan Assembly Kit helps to remove ambient heat that rackmount components can emit. Circulating new air into a wall mount cabinet or server enclosure helps to maintain the optimal temperature for devices such as servers, battery backups, and UPS's.

  • Ball bearing design
  • 115V / 78 CFM
  • Impedance protected
  • RoHS compliant
  • Includes power cord, fan guard, and installation hardware
  • 1-Year Limited Warranty

3U Triple Fan Panel

SKU: 1908-3-001-02

1908-3-001-02 : 3U Triple Fan Panel : Isometric View

The Kendall Howard Triple Fan Panel combines three 115 CFM fans, which together move 345 cubic feet of air per minute. By installing the Triple Fan Panel into your network configuration, you can ensure that the heat produced by your device will be properly and efficiently dissipated, resulting in a cooler environment within your cabinet.

  • Includes three 115V/115 CFM Fans
  • Includes a 3-tail power cord
  • Impedance protected
  • 19" EIA compliant
  • RoHS compliant
  • 1-Year Limited Warranty

1U Stationary Keyboard Tray

SKU: 1910-1-001-01

1910-1-001-01 : 1U Stationary Keyboard Tray : Isometric View

The Kendall Howard 1U Stationary Keyboard Tray is a great way to support a keyboard in any 19" EIA compliant rack system. Easy to install, lightweight, and space-efficient, this keyboard tray allows for easy access to your keyboard.

  • Slim 1U design
  • Rounded Corners
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

Wall Mount SFF CPU Bracket

SKU: 1915-1-300-00

1915-1-300-00 : Wall Mount SFF CPU Bracket : Isometric View

Kendall Howard's Small-Form-Factor (SFF) Wall Mount CPU Brackets are designed to get the computer off the floor or desktop. Computers located on the floor are in continual danger of being jostled or kicked, and also create difficulty when accessing drives, ports, and card readers. But the desk is not always the best spot for this equipment either. Desktop computers and PCs located on desks take up valuable workspace, create a cluttered and unorganized look, and run the risk of being damaged by coffee or soda spills. The Wall Mount SFF CPU Brackets are an easy mounting solution to protect your PC and ultimately get it off the floor or desktop. To help secure the PC, a hook and loop stray is included with the bracket.

  • Heavy-duty 14-gauge steel
  • Maximum dimensions: 4.25" wide x 18" deep
  • 75 lb. weight capacity
  • Hook and loop strap included
  • Mounts in minutes to any wall or desk
  • Made in the USA
  • Limited Lifetime Warranty
1915-1-400-00 : Wall Mount Desktop CPU Bracket : Isometric View

The Kendall Howard Wall Mount Desktop CPU Bracket is designed to safely store tower computers out of the way by mounting them to the wall or the side of a desk. Desktop computers and PCs that sit on a desk take up valuable workspace, look cluttered and unorganized, and run the risk of being damaged due to soda or coffee spills. But the floor is no place for it either. Computers located on the floor are in continual danger of being jostled and kicked, not to mention the difficulty in accessing the drives, ports, and card readers. By installing this Wall Mount CPU Bracket, you can create a more functional and organized workspace while also better protecting your PC from damage.

  • Maximum dimensions: 7.75" W x 18" D
  • 75 lb. weight capacity
  • Hook and loop included
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-200-12 : 12U Side Load Wall Mount Rack : Isometric View

The Kendall Howard Side Load Wall Mount Rack is an open frame rack with a twist...literally. The rack mounts sideways allowing you to install equipment from side to side. This innovative concept not only allows you to install deeper equipment than most other wall mount racks, but you also have clear and easy access to the front and rear of the devices. With a weight capacity of up to 350 lbs., this side loading wall rack is a great solution for servers, battery backups, and other heavy rackmount components.

  • 20" fixed mounting depth
  • 350 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

1U Patch Panel Bracket

SKU: 1916-3-200-01

1916-3-200-01 : 1U Patch Panel Bracket : Isometric View

The Kendall Howard 1U Patch Panel Bracket makes mounting patch panels and/or other shallow equipment simple and easy. The unique hinged design allows installed equipment to swing to the left or right 180 degrees for convenient access to the back. These hinged wall mount systems are a fantastic alternative to larger, more expensive solutions that end up wasting space.

  • 6" usable depth
  • 180 degree swing-out
  • 10-32 tapped rails (screws not included)
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

2U Patch Panel Bracket

SKU: 1916-3-200-02

1916-3-200-02 : 2U Patch Panel Bracket : Isometric View

Kendall Howard Patch Panel Brackets make mounting patch panels or shallow equipment simple and easy. When there is no need for a wall mount rack or cabinet, Patch Panel Brackets are a great low cost alternative.

  • 180 degree swing-out
  • 6" maximum depth
  • 19" EIA compliant
  • Requires 10-32 Rack Screws
  • Made in the USA
  • Limited Lifetime Warranty

4U Patch Panel Bracket

SKU: 1916-3-200-04

1916-3-200-04 : 4U Patch Panel Bracket : Isometric View

Kendall Howard Patch Panel Brackets make mounting patch panels or shallow equipment simple and easy. When there is no need for a wall mount rack or cabinet, Patch Panel Brackets are a great low cost alternative.

  • 180 degree swing-out
  • 6" maximum depth
  • 19" EIA compliant
  • Requires 10-32 Rack Screws
  • Made in the USA
  • Limited Lifetime Warranty

6U Patch Panel Bracket

SKU: 1916-3-200-06

1916-3-200-06 : 6U Patch Panel Bracket : Isometric View

Kendall Howard Patch Panel Brackets make mounting patch panels or shallow equipment simple and easy. When there is no need for a wall mount rack or cabinet, Patch Panel Brackets are a great low cost alternative.

  • 180 degree swing-out
  • 6" maximum depth
  • 19" EIA compliant
  • Requires 10-32 Rack Screws
  • Made in the USA
  • Limited Lifetime Warranty

2U Rack Mountable Drawer

SKU: 1922-3-100-02

1922-3-100-02 : 2U Rack Mountable Drawer : Isometric View

The Kendall Howard 2U Rack Mountable Drawer provides a secure space within your rack or cabinet for storing files, electronics, software, cables, testers, and more. By storing equipment within the rack, you'll save time running back and forth to retrieve it. The locking drawer will ensure your peripherals are protected from damage or unauthorized tampering.

  • 100 lb. weight capacity
  • Smooth ball bearing slides
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

3U Rack Mountable Drawer

SKU: 1922-3-100-03

1922-3-100-03 : 3U Rack Mountable Drawer : Isometric View

Kendall Howard Rackmount Drawers include a built-in lock and have a maximum load capacity of 100 pounds. The easy to remove slides make installation simple and easy.

  • 100 lb. weight capacity
  • Smooth ball bearing slides
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

4U Rack Mountable Drawer

SKU: 1922-3-100-04

1922-3-100-04 : 4U Rack Mountable Drawer : Isometric View

Kendall Howard Rackmount Drawers include a built-in lock and have a maximum load capacity of 100 pounds. The easy to remove slides make installation simple and easy.

  • 100 lb. weight capacity
  • Smooth ball bearing slides
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1922-3-300-01 : 1U 20" Rack Mountable Sliding Shelf : Isometric View

The Kendall Howard 1U 20" Rack Mountable Sliding Shelf is perfect for servers, keyboards, KVM's, switches, or any other component that you want the ability to slide out, either for convenience or to access the back of the equipment. The built-in front lip makes sliding the shelf in and out easy, and the 4-point adjustable mounting make this sliding rack shelf a smart addition to any network rack or cabinet.

  • 20" depth
  • 100 lb. weight capacity
  • Adjustable mounting depth
  • 17.72" maximum slide extension
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
Page:
of 8 < Prev Next >
Products 1-20 of 158

Stay in Touch