Kendall Howard ®
Quick Product Finder
Page:
of 8 < Prev Next >
Products 41-60 of 158
Show

6U Flat Spacer Blank

SKU: 1901-1-101-06

1901-1-101-06 : 6U Flat Spacer Blank : Isometric View

The Kendall Howard 6U Flat Spacer Blanks are a cut above the rest. Spacer Blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These rack panels are also critical for controlling proper airflow especially in cold aisle/hot aisle applications.

  • Rounded corners
  • Tool-less mounting clips included
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

Wall Mount Hardware Kit

SKU: 0300-1-001-00

0300-1-001-00 : Wall Mount Hardware Kit : Isometric View

Mounting cabinets and racks doesn't have to be a pain. The Kendall Howard Wall Mount Hardware Kit makes installing wall mount solutions quick and easy. With all the hardware you need to get the job done, the Wall Mount Hardware Kit will have you mounting your cabinets like a pro.

  • Phillips head bolts
  • Takes 1/2" drill diameter hole; meets Federal Specification Requirements FF-B-588D Type V
  • Pre-assembled, ready for use
  • Automatically adjusts to wall thickness

2U 14" Vented Eco Shelf

SKU: 1906-1-010-02

1906-1-010-02 : 2U 14" Vented Eco Shelf : Isometric View

The Kendall Howard 2U 14" Vented Eco Shelf is a medium duty shelf that helps to maintain proper air circulation in your racks and cabinets. Rated to hold up to 50 lbs., this cantilever rack shelf is perfect for supporting monitors, switches and other lightweight network or A/V equipment.

  • 14" depth
  • 50 lb. weight capacity
  • Venting pattern allows for maximum air flow
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1906-3-222-02 : 2U 14" Vented Eco Shelf - 2 Pack : Isometric View

The Kendall Howard 2U 14" Vented Eco Shelf is a medium duty shelf that helps to maintain proper air circulation in your racks and cabinets. Rated to hold up to 50 lbs., this cantilever rack shelf is perfect for supporting monitors, switches, and other lightweight network or A/V equipment.

  • Two pack
  • 14" depth
  • 50 lb. weight capacity
  • Venting pattern allows for maximum air flow
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

1U 4-Point Adjustable Shelf

SKU: 1906-3-007-01

1906-3-007-01 : 1U 4-Point Adjustable Shelf : Isometric View

The Kendall Howard 1U 4-Point Adjustable Rack Shelf is the perfect addition to any 4-post rack or cabinet. The split design allows the shelf depth to be adjusted from 22" to 40". Save yourself the time and frustration of trying to find a rack shelf to fit a specific depth, and let this versatile solution meet all your shelving needs.

  • Adjusts from 22" to 40"
  • 250 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

1U 12" Component Shelf

SKU: 1906-1-001-01

1906-1-001-01 : 1U 12" Component Shelf : Isometric View

The Kendall Howard 1U 12" Component Shelf takes on a lot of weight for its size. Rated to hold up to 70 lbs., this tough little shelf is perfect for supporting non-rack mountable equipment such as routers, hubs, monitors, and UPS's.

  • 12" depth
  • 19" EIA compliant
  • 70 lb. weight capacity
  • Made in the USA
  • Limited Lifetime Warranty

10-32 Rack Screws - 50 Pack

SKU: 0100-1-001-01

0100-1-001-01 : 10-32 Rack Screws - 50 Pack : Isometric View

The Kendall Howard 10-32 Rack Screws are not your everyday hardware store item. These superior, American-made, quality screws should be your only choice for installing rackmount devices such as shelves, cable managers, servers, and other network, A/V and electronic equipment.

  • Quantity: 50
  • 0.75" in length
  • 10-32 pilot point
  • Phillips truss head
  • Packaged in an aluminum tin
  • RoHS compliant
  • Made in the USA

10-32 Cage Nuts - 50 Pack

SKU: 0200-1-001-01

0200-1-001-01 : 10-32 Cage Nuts - 50 Pack : Component View

The Kendall Howard 10-32 cage nuts create a threaded mounting hole for mounting equipment on to universal rack rails commonly found in server enclosures, open frame racks, and wall mount cabinets. Universal mounting rails, also known as cage nut style rails, are the most common and preferred type of rails used on the market today.

  • Quantity: 50
  • Thread Size: 10-32
  • Snap-in Design
  • Packaged in an aluminum tin
  • RoHS compliant
  • Made in the USA
1917-3-001-00 : DVR Security Lock Box : Isometric View

The Kendall Howard DVR Security Lock Box safely secures devices such as digital video recorders, sensitive network appliances or even tower computers. Designed to be a desktop or wall mount solution, this secure lock box allows you to prevent unauthorized use of your equipment in a variety of environments.

  • Heavy duty security enclosure
  • 270 degree swing open door
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-300-12 : 12U V-Line Wall Mount Rack - 12" Depth : Isometric View

The Kendall Howard 12U V-Line Wall Mount Rack is the perfect entry level solution for IT installers, musicians, audio/visual technicians, and anyone else in the telecom industry. When a simple open frame wall mount rack is needed, the Kendall Howard V-Line Open Frame Fixed Wall Mount Rack is a great option.

  • 12" usable depth
  • Cage Nut or 10-32 Tapped Rails
  • Self-squaring design
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

8U Wall Mount Rack

SKU: 1915-3-001-08

1915-3-001-08 : 8U Wall Mount Rack : Isometric View

The Kendall Howard 8U Wall Mount Rack was the first of its kind! It did not take long for this rack to become the standard that all wall mount racks are measured against. The two-piece design offers unlimited flexibility. This innovative design can adjust to any width so it can house either 19" EIA or 23" EIA rackmount equipment. The generous 18" depth has enough room for cables, switches, routers, and so much more. Whether you are mounting it under a desk, on a wall, or to the ceiling, the 8U Modular Wall Mount Rack is perfect for any application.

  • 18" maximum depth
  • 350 lb. weight capacity
  • EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

2U Center Mount Shelf

SKU: 1907-3-001-02

1907-3-001-02 : 2U Center Mount Shelf : Isometric View

Kendall Howard’s 2U Center Mount Shelf is an economical, medium duty rackmount shelf ideal for mounting into 2-post racks. The shelf’s 19” depth provides plenty of room to support monitors, switches, A/V equipment, battery backups, and more. Its center mount design allows the shelf to also hold deeper equipment, such as large, non-rackmountable components, while still maintaining its weight capacity. For routing and managing cables, use any of the cable lacing points, found in the front, back, and sides of the center rackmount shelf. Our Hook and Loop Cable Ties are a great way to secure or organize any cables coming in or out of equipment mounted on the shelf. The Center Mount Shelf features side mounting flanges (or ears) for installing into a rack. Each ear includes four mounting holes that need to completely align into two holes of two U spaces. To ensure maximum support, the weight must be evenly distributed across the shelf, and four screws must be installed in each flange. While the Center Mount Shelf is intended to install with the side panels facing up, it can be flipped over and mounted with the side panels facing down. The Center Mount Shelf is a reliable, medium duty shelf that comes ready for installation.

  • 19” usable depth
  • One-piece design
  • Economical shelf
  • Uses two U spaces
  • 70 lb. weight capacity (evenly distributed)
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
CM-800 : Wall Mount Charging Station : Isometric View

The Kendall Howard Wall Mount Charging Station is one of the only thin wall mountable electronic charging cabinets on the market. It holds 8-12, 12" tablets (or laptops depending on size) and includes a power strip to charge multiple devices at once. To keep these valuable devices safe from tampering or unauthorized use, we’ve equipped the shallow cabinet with locking, dual front doors. Its low profile design makes the Wall Mount Charging Station suitable for multiple environments including offices, retail stores, classrooms, training centers, and more.

As technology and equipment continues to evolve, this is one product that will stick. It’s a universal charging and storage center that is not proprietary to any tablet or charging style. Keep your devices at an optimum battery life with the Kendall Howard Wall Mount Charging Station – a low profile solution that has power and security all in one!

*Pictured tablets not included.

1915-3-500-08 : 8U 18" Deep Open Frame Wall Rack : Isometric View

The 18” Deep Open Frame Wall Rack has a feature-rich, dual frame design making it easy for IT technicians to install. This sturdy, open frame rack permits 18” of usable depth to house network switches, patch panels, A/V devices, and other non-rackmountable equipment. For convenient cable routing in and around the installed equipment, use any of the cable lacing points found on the top and bottom of this 2-piece open wall rack. The 18” Deep Open Frame Wall Rack is sleek, with a simplistic design, making it a strong and durable solution for your next network system.

  • Two-piece design
  • 18” usable depth
  • 10-32 tapped rails
  • Includes 25 rack screws
  • Ships knockdown
  • 130 lb. weight capacity
  • 19” EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-400-04 : 4U Pivot Frame Wall Mount Rack : Isometric View

The 4U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.

Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rackmount Brackets.

Adjustable CPU Holder

SKU: 1915-1-500-00

1915-1-500-00 : Adjustable CPU Holder : Application

The Kendall Howard Adjustable CPU Holder is a superior mounting solution for safely securing your computer off the floor and at a more convenient access height. The universal design adjusts both vertically and horizontally to accommodate computer towers large or small. With multiple mounting options you can choose whether you want to suspend your computer from under the work surface or mount to the side of your workstation.

  • Tool-less adjustability
  • 60 lb. weight capacity
  • Ships fully assembled
  • Includes two hook and loop straps
  • Installation hardware included
  • Made in the USA
  • Limited Lifetime Warranty

2U V-Rack - Tapped Rails

SKU: 1916-2-101-02

1916-2-101-02 : 2U V-Rack - Tapped Rails : Isometric View

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rackmountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

  • Low profile design
  • Tapped rails
  • Includes 12 10-32 Rack Screws
  • No depth restrictions
  • 150 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1903-3-300-01 : 1U Finger Duct Cable Manager : Isometric View (with cover)

Designed for easy installation, the 1U Finger Duct Cable Manager provides the structure you need to safely organize and protect your network cables. The narrow open design is ideal for routing cables between patch panels and switches. Steel construction and a 3" depth make this cable manager perfect for high density cable applications with lasting stability. For added protection and storage, a cover is included to enclose the cables and create a clean look for your rack. Rear cut outs allow cables to pass through the back of the unit - a great feature when mounting two units back to back. Make organizing and routing cables a snap with the 1U Finger Duct Cable Manager.

  • Cable manager cover included
  • Narrow finger ducts for easy separation of cables
  • Durable, steel construction
  • Rackmountable with standard rack hardware
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1932-3-001-08 : 8U Compact SOHO Server Cabinet : Isometric View

The 8U Compact Series SOHO Cabinet is a sleek and robust server cabinet specially designed for the small business, home office, or IT professional who wants better than just "good enough". The small profile cabinet easily rolls under a work surface, tucks away in a closet or squeezes into the places full size racks cannot. Need a desk top solution? Simply remove the casters and it can be set on any flat surface.

  • Locking, lift off front and rear perforated doors
  • Includes casters and one 78 cfm fan and power cord
  • Two sets of adjustable cage nut style rails
  • Rails are adjustable from 3" to 28" deep
  • 400 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1940-3-001-41 : 41U Knockdown 4-Post Open Frame Rack : Isometric View

Kendall Howard manufactures the 41U Knockdown 4-Post Open Frame Rack - one of the strongest adjustable open frame knockdown racks on the market today. Our unique, heavy duty, square tube steel design assembles with just a few bolts and makes this racking system affordable, versatile, and easy to ship. Its knockdown design makes it able to ship in a small wooden crate and ship out as a small package that can be delivered the next day. For a reliable and convenient racking solution, the 41U Knockdown 4-Post Open Frame Rack is a great option.

  • Fully adjustable rails from 3" to 36"
  • Levelers included
  • Assembles in less than 30 minutes
  • Cage nut style rails
  • 2,000 lb. weight capacity (Holds 1,000 lbs. on casters)
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
Page:
of 8 < Prev Next >
Products 41-60 of 158

Stay in Touch