Home > Full Size Racks/Enclosures > 2-Post Open Frame Server Racks
Filter Results
Color: Weight Capacity:
Quick Product Finder
Products 1-5 of 5
Show

24U 2-Post Relay Rack

SKU: 1911-3-200-24

1911-3-200-24 : 24U 2-Post Relay Rack : Isometric View

Whether working with a wiring closet, telecom room, or data center, the Kendall Howard 2-Post Relay Rack is the ideal racking solution. Its sturdy construction makes a rigid, reliable rack that can hold up to 800 lbs. of equipment, including switches, patch panels, UPS’s, rack shelves, rackmount keyboard trays, and more. The rack features four ¼-20 x 0.5” grounding studs on the inside of the rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. When multiple 2-Post Relay Racks are needed, simply gang them together with the ganging holes on both sides of the frame. You can even gang both the 24U and 45U size racks together because the holes align. Cable pass through slots are also included on the frames to allow cabling to pass through between racks. The completely open top design allows the 2-Post Relay Rack to accept cable bundles. It also makes the rack compatible with most ladder racks and coordinating accessories. When you need a 2-post rack that offers both strength and dependability, there is none other than the 2-Post Relay Rack.

  • 10-32 tapped rails
  • Includes 25 10-32 rack screws
  • Includes four ¼-20 grounding studs
  • Gangable
  • Ships knocked down
  • 800 lb. weight capacity
  • 19” EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

45U 2-Post Relay Rack

SKU: 1911-3-200-45

1911-3-200-45 : 45U 2-Post Relay Rack : Isometric View

Whether working with a wiring closet, telecom room, or data center, the Kendall Howard 2-Post Relay Rack is the ideal racking solution. Its sturdy construction makes a rigid, reliable rack that can hold up to 800 lbs. of equipment, including switches, patch panels, UPS’s, rack shelves, rackmount keyboard trays, and more. The rack features four ¼-20 x 0.5” grounding studs on the inside of the rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. When multiple 2-Post Relay Racks are needed, simply gang them together with the ganging holes on both sides of the frame. You can even gang both the 24U and 45U size racks together because the holes align. Cable pass through slots are also included on the frames to allow cabling to pass through between racks. The completely open top design allows the 2-Post Relay Rack to accept cable bundles. It also makes the rack compatible with most ladder racks and coordinating accessories. When you need a 2-post rack that offers both strength and dependability, there is none other than the 2-Post Relay Rack.

  • 10-32 tapped rails
  • Includes 25 10-32 rack screws
  • Includes four ¼-20 grounding studs
  • Gangable
  • Ships knocked down
  • 800 lb. weight capacity
  • 19” EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

41U 2-Post Cable Cove Rack

SKU: 1911-3-000-41

1911-3-000-41 : 41U 2-Post Cable Cove Rack : Isometric View

The Kendall Howard 2-Post Cable Cove Rack is the perfect relay rack for high density network and telecom installations! The 1,200 lb. weight capacity and 4" vertical cable channels can handle just about any network large or small. So load it up with servers, UPS's, rack shelves, patch panels, switches, and more. The Kendall Howard Cable Cove Rack is ready for the challenge!

  • Two 4" internal vertical cable channels
  • 1,200 lb. weight capacity
  • Base capable of anchoring to floors
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

2-Piece Rack Conversion Kit

SKU: 1927-3-002-00

1927-3-002-00 : 2-Piece Rack Conversion Kit : Isometric View

The Kendall Howard 2-Piece Conversion Kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. If you have to move or replace the rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 2-Piece Conversion Kit provides a safe and dependable solution.

  • Provides added support to a 2-Post Rack
  • Adjustable from 20" to 35"
  • Mounting hardware not included
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

4-Piece Rack Conversion Kit

SKU: 1927-3-004-00

1927-3-004-00 : 4-Piece Rack Conversion Kit : Isometric View

The Kendall Howard 4-Piece Conversion Kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. The 4-Piece Conversion Kit allows you to also upgrade any 2-post rack to a 4-post rack with an adjustable depth of 24 - 40". If you have to move or replace the rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 4-Piece Conversion Kit provides a safe and dependable solution.

  • Provides added support to a 2-post rack
  • Creates a 4-post rack with two 2-post racks
  • Adjustable from 20" to 35"
  • Mounting hardware not included
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
Products 1-5 of 5

Stay in Touch