Home > Wall Mount Racks/Cabinets > Open Frame Wall Mount Racks
Filter Results
Rack Units: Color:
Quick Product Finder
< Prev Next >
Products 1-20 of 21
Show
1915-1-800-12 : 12U Phantom Class® Open Frame Swing-Out Rack : Isometric View

The 12U Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rackmount equipment up off the floor, and it can easily support up to 150 lbs. The 90 degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.

  • One set of 10-32 tapped rails
  • 150 lb. weight capacity
  • 20" usable mounting depth
  • 19" EIA compliant
  • Ships knocked down
  • Made in the USA
  • Limited Lifetime Warranty
1915-1-800-18 : 18U Phantom Class® Open Frame Swing-Out Rack : Isometric View

The 18U Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rackmount equipment up off the floor, and it can easily support up to 150 lbs. The 90 degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.

  • One set of 10-32 tapped rails
  • 150 lb. weight capacity
  • 20" usable mounting depth
  • 19" EIA compliant
  • Ships knocked down
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-200-12 : 12U Side Load Wall Mount Rack : Isometric View

The Kendall Howard Side Load Wall Mount Rack is an open frame rack with a twist...literally. The rack mounts sideways allowing you to install equipment from side to side. This innovative concept not only allows you to install deeper equipment than most other wall mount racks, but you also have clear and easy access to the front and rear of the devices. With a weight capacity of up to 350 lbs., this side loading wall rack is a great solution for servers, battery backups, and other heavy rackmount components.

  • 20" fixed mounting depth
  • 350 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-300-12 : 12U V-Line Wall Mount Rack - 12" Depth : Isometric View

The Kendall Howard 12U V-Line Wall Mount Rack is the perfect entry level solution for IT installers, musicians, audio/visual technicians, and anyone else in the telecom industry. When a simple open frame wall mount rack is needed, the Kendall Howard V-Line Open Frame Fixed Wall Mount Rack is a great option.

  • 12" usable depth
  • Cage Nut or 10-32 Tapped Rails
  • Self-squaring design
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

2U V-Rack - Tapped Rails

SKU: 1916-2-101-02

1916-2-101-02 : 2U V-Rack - Tapped Rails : Isometric View

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rackmountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

  • Low profile design
  • Tapped rails
  • Includes 12 10-32 Rack Screws
  • No depth restrictions
  • 150 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-400-04 : 4U Pivot Frame Wall Mount Rack : Isometric View

The 4U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.

Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rackmount Brackets.

8U Wall Mount Rack

SKU: 1915-3-001-08

1915-3-001-08 : 8U Wall Mount Rack : Isometric View

The Kendall Howard 8U Wall Mount Rack was the first of its kind! It did not take long for this rack to become the standard that all wall mount racks are measured against. The two-piece design offers unlimited flexibility. This innovative design can adjust to any width so it can house either 19" EIA or 23" EIA rackmount equipment. The generous 18" depth has enough room for cables, switches, routers, and so much more. Whether you are mounting it under a desk, on a wall, or to the ceiling, the 8U Modular Wall Mount Rack is perfect for any application.

  • 18" maximum depth
  • 350 lb. weight capacity
  • EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

12U Wall Mount Rack

SKU: 1915-3-001-12

1915-3-001-12 : 12U Wall Mount Rack : Isometric Viwe

The Kendall Howard 12U Wall Mount Rack was the first of its kind! It did not take long for this rack to become the standard that all wall mount racks are measured against. The two-piece design offers unlimited flexibility. This innovative design can adjust to any width so it can house either 19" EIA or 23" EIA rackmount equipment. The generous 18" depth has enough room for cables, switches, routers, and so much more. Whether you are mounting it under a desk, on a wall, or to the ceiling, the 12U Modular Wall Mount Rack is perfect for any application.

  • 18" maximum depth
  • 350 lb. weight capacity
  • EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-300-16 : 16U V-Line Wall Mount Rack - 12" Depth : Isometric View

Kendall Howard V-Line Open Frame Fixed Wall Mount Racks are the perfect low cost solution that IT installers and A/V technicians use every day. Kendall Howard knockdown 16U Fixed Wall Racks are incredibly easy to assemble and install.

  • 12" usable depth
  • Cage Nut or 10-32 Tapped Rails
  • Self-squaring design
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

3U V-Rack - Tapped Rails

SKU: 1916-2-101-03

1916-2-101-03 : 3U V-Rack - Tapped Rails : Isometric View

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rackmountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

  • Low profile design
  • Tapped rails
  • Includes 18 10-32 Rack Screws
  • No depth restrictions
  • 150 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-400-08 : 8U Pivot Frame Wall Mount Rack : Isometric View

The 8U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.
Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rackmount Brackets.

1915-3-300-21 : 21U V-Line Wall Mount Rack - 12" Depth : Isometric View

Kendall Howard V-Line Open Frame Fixed Wall Mount Racks are the perfect low cost solution that IT installers and A/V technicians use every day. Kendall Howard knockdown 21U Fixed Wall Racks are incredibly easy to assemble and install.

  • 12" usable depth
  • Cage Nut or 10-32 Tapped Rails
  • Self-squaring design
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

4U V-Rack - Tapped Rails

SKU: 1916-2-101-04

1916-2-101-04 : 4U V-Rack - Tapped Rails : Isometric View

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rackmountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

  • Low profile design
  • Tapped rails
  • Includes 24 10-32 Rack Screws
  • No depth restrictions
  • 150 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-401-00 : Pivot Frame Wall Mount Rack Cover : Isometric View

The Pivot Frame Wall Mount Rack Cover was designed as an enclosure for the 4U and 8U Pivot Frame Wall Mount Racks. Whether placed above or below the rack, the cover provides a flat and sturdy surface for other non-rack mountable equipment. The cover also prevents dust and debris from settling on the equipment. To create a larger racking solution, network installers will often mount multiple Pivot Frame Wall Mount Racks above and/or below each other, and in this case, the cover acts as a separator between each unit. The cover's rear cut out also provides an entrance for cable routing. Top off your Pivot Frame Wall Mount Rack and protect your system with the convenient Pivot Frame Wall Mount Rack Cover.

  • Compatible with the 4U and 8U Pivot Frame Wall Mount Racks
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-301-12 : 12U V-Line Wall Mount Rack - 18" Depth : Isometric View

The Kendall Howard 12U 18" Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 12U 18" Deep V-Line Wall Mount Rack.

  • 18" usable depth
  • Cage Nut or 10-32 Tapped Rails
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

2U V-Rack

SKU: 1916-2-100-2

1916-2-100-2 : 2U V-Rack : Isometric View

The Kendall Howard 2U V-Rack makes mounting any single server or other rackmountable device easy. The innovative design allows equipment to be mounted vertically or on its side, and flush against the wall. This unique mounting style provides users more versatility on where they can place their products while saving them space.

  • Does not include hardware - rack screws sold separately
  • Low profile design
  • Universal cage nut style rails
  • No depth restrictions
  • 150 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-402-00 : Pivot Frame Stationary Rackmount Brackets : Isometric View

The Pivot Frame Stationary Rackmount Brackets offer the ability to add an extra U space to the top or bottom of the 4U and 8U Pivot Frame Wall Mount Rack. In many network schemes, rear access is needed for the installation and maintenance of patch panels and switches, making the Pivot Frame Wall Mount Rack a suitable solution. In some cases, routers, hubs or other non-rack mountable devices are placed on a shelf installed within the rack configuration. When these devices and shelves are positioned within the rack, they tend to slide off when the pivot frame is tilted down. Designed with that in mind, the Pivot Frame Stationary Rackmount Brackets allow these devices to be mounted and secured in a fixed position. Simply install the brackets to the top or bottom of the rack, install a 1U 5" Component Shelf, and you now have a fixed and reliable location to support those peripherals.

  • Compatible with the 4U and 8U Pivot Frame Wall Mount Rack
  • 10-32 tapped rails (10-32 rack screws sold separately)
  • 12" useable depth
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-301-16 : 16U V-Line Wall Mount Rack : Isometric View

The Kendall Howard 16U 18" Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 16U 18" Deep V-Line Wall Mount Rack.

  • 18" usable depth
  • Cage Nut or 10-32 Tapped Rails
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
1915-3-301-21 : 21U V-Line Wall Mount Rack - 18" Depth : Isometric View

The Kendall Howard 21U 18" Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 21U 18" Deep V-Line Wall Mount Rack.

  • 18" usable depth
  • Cage Nut or 10-32 Tapped Rails
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty

3U V-Rack

SKU: 1916-2-100-3

1916-2-100-3 : 3U V-Rack : Isometric View

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rackmountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

  • Does not include hardware - rack screws sold separately
  • Low profile design
  • Universal cage nut style rails
  • No depth restrictions
  • 150 lb. weight capacity
  • 19" EIA compliant
  • Made in the USA
  • Limited Lifetime Warranty
< Prev Next >
Products 1-20 of 21

Stay in Touch